Cabinet White

Grade Cabinet White.

This grade is analogous to #1 Common grade.

The boards of this grade shall be white with no false heartwood.

Sorting is performed by the better face. So, if one face is #1 Common and white, while the back face is #2 Common and also white (or with minimum colouration), then such board is referred to WSB Cabinet White grade.

The front (better) face shall be at least 90% white. The back face shall be at least 50% white.

Minimum clear wood cutting: 75 mm x 900 mm or 100 mm х 600 mm.

Any amount of live point knots (up to 5 mm) over the whole surface of a board is not recognized as a flaw.

Any wane on the front face is not allowed. Wane is allowed on the back or worse face only and shall not exceed 12 mm in width and 25% of the board length.

The board thickness is 22mm (-0/+1 mm). The both faces are planed to finish (S2S).The edges are rough after sawing. This board can also be supplied unplaned by

individual customer’s request. 

The board widths are from 89 mm and wider (with optional pace, i.e. the boards are of various widths). The widths from 89 mm to 100 mm shall not exceed 5% of the total batch volume.

The lengths are from 1830 mm and longer with any pace. The ends are straight and even.The boards with lengths from 1830 mm to 2135 mm shall not exceed 10% of the

batch. 

The boards are stacked into three types of packs according to the following lengths:

- Pack of short length – from 1830 mm to 2440 mm

- Pack of medium length – from 2445 mm to 3050 mm

- Pack of long length – from 3055 mm to 3660 mm              

                           front face                                            back face